Da-Lite Screen Controller (PoE Injector) DL16521

The Screen Controller is an accessory for Da-Lite motorized projection screens with integrated low voltage control or an external low voltage control. This Screen Controller box allows remote control of a screen or control through a TCP/IP connection, VPI (Video Projector Interface) Trigger, Dry Contact and RS232 Communication. It features:

• Requires a low voltage control, either built into the screen or external.
• Configured to supply every control configuration you might need for your projection screen.
• Powered by PoE (Power over Ethernet) that requires a connection to an ethernet switch that provides PoE+ power (30W minimum). If your switch does not provide this power or you are not planning on using an ethernet connection, you will need to use a PoE injector with the controller.
• Web interface used for initial device setup, administrative control and operation.
• Compatible with the Vaddio Deployment Tool which scans the network for Vaddio & Da-Lite devices, lists them by model and IP address, identifies all devices that are not setup, and provides the controls to complete the initial device setup along with links to each device’s web interface.
• Screen controller is available in kits with wireless remote capability with or without a Luxul XPE-2500 PoE injector in IR or RF (BLE).

Single Port Gigabit PoE/PoE+ Injector 30W features:

• 802.3af/at compliant
• Delivers up to 30 Watts of power
• Gigabit Speeds (10/100/1000)
• Built in power supply

Product Compatibility:

Electric Screens with standard built-in low voltage control (LVC):

• Tensioned Advantage Series
• Advantage Series
• Tensioned Contour Electrol
• Contour Electrol

Electric Screens with optional built-in LVC:

• Tensioned Cosmopolitan Series
• Cosmopolitan Series
• Designer Contour Electrol

Single Motor Low Voltage Control System (external control for screens without built-in LVC)