Designed to accommodate LCD and DLP projectors, Chief's SL-150 electric ceiling lift requires only 11 inches of ceiling clearance, can be mounted on either finished or suspended ceilings and easily accommodates multiple control options.

The SL-150 also features:

• Optional flush or recess mounting for added projector security.
• 8.25" of travel.
• +/- 2 degrees tilt, +/- 12 degree rotation and +/- 5 degree leveling ranges for optimal positioning.
• Horizontal and vertical cradle positioning
• Low-voltage control.
• Optional push-up, table top installation if mounted upside-down.
• Horizontal and vertical projector cradle adjustment.
• A choice of three mounting methods. (See below.)
• Quick projector disconnect/reconnect.
• Two internal outlets, one of which is switched on 110V units.
• 35 lb weight capacity.
• 0.9 amp continuous current draw.

All electrical components are UL, CSA, and VDE listed.

**For proper installation, this lift requires one SLB adapter plate. (Sold separately.) See the "Related Products" section, below, for more information.

Mountable by either:

• Three 3/8" threaded rods.
• 1.5" extension column, which provides 1.5" horizontal adjustment. (Please order the SMA-600).
• Built-in, side mounting, joist tabs, allows direct installation on wood-framed ceilings.

*Please Note: Electric lifts are considered Custom Orders and are, therefore, NOT returnable. To ensure your complete satisfaction, please call us with any questions before making your order.

• Minimum Clearance Above Ceiling: 11 inches
• Maximum Projector Size: 9.5" H x 18" W x 22.25" L
• Ceiling Opening: 22" W x 25.75" D (-0 and +3/8")
• Ceiling Closure Panel: 19.75" W x 23.5" D
• Voltage: 120V or 230V (Will also accept 5-30V AC/DC low voltage for triggering commands.)
• Current Draw: 0.9 amps, continuous
• Weight Capacity: 35 lbs.

Click Here to view more products by this manufacturer.